ã€Chinese Packaging Network News】QJ211H microcomputer control box tensile testing machine maintenance and maintenance
Shanghai Ditech Instrument Co., Ltd. is a professional packaging testing equipment manufacturer. The company's carton compression testing machine cooperates with Libai, Liwen Paper and other groups. The performance parameters and technical specifications of the carton compression tester are in accordance with ISO2872 "Packaging - Complete, Fully Loaded Transport Packages - Pressure Test", ISO2874 "Packaging - Complete, Fully Loaded Transport Packages" "Compression test carried out by a pressure tester" and GB 4857.4 "Pressure test method for basic test of transport packages" and other standards, applicable to compressive strength test and stacking strength test of type corrugated box and other packaging products.
In everyday use, the repair and maintenance of the carton compressive testing machine will surely be involved. The following Shanghai dump technique will introduce you to the repair and maintenance of the carton compressive testing machine.
1. The operator should thoroughly read the instruction manual and strictly observe the operation rules;
2. Maintain the working environment of the tester clean and tidy;
3. When the test machine fails, it should be checked and ruled out by a professional. Do not run it sick.
4. Insist on periodic verification to maintain the excellent technical status of the testing machine. The verification period is generally one year;
5. Irregularly lubricate the moving parts of the testing machine intermittently
6. When the paper roll is used up or the writing is unclear, replace the paper roll or print ribbon.
7. The two drive screws of the carton compressive tester must be properly lubricated. The lubricating oil is made of specific mechanical oil. When refueling, the dust shields at the opening of the two columns must be disassembled, brushed with a brush, and oiled. Do not go down to the degree.
8. Carton compression tester drive chain should be timely refueling, lubricating oil using a specific type of mechanical oil, when refueling, the test machine can be tilted back to make the base up, with a brush and enamel brush on the bottom of the base chain, The fluid should not be too much, so that it does not flow down.