[ Chinese wardrobe network ] With the continuous advancement of industrial technology, there are more places where we use hinges in our lives. Many of them do not understand the old-fashioned wardrobe hinges and do not know the installation points of the old wardrobe hinges. I would like to introduce you to the old-fashioned wardrobe hinges and tell you the old-fashioned wardrobe hinge installation skills, so that everyone can have convenience when facing the old-fashioned wardrobe hinges. Please see the introduction of the old-fashioned wardrobe hinges.
Introduction to the old wardrobe hinge
Wardrobe hinges, also called wardrobe door hinges, are the wardrobe hinges and wardrobe door hinges that we often say. The simplest wardrobe hinges are connected by two patches, and a wire is machined at the joint. Connected. The connected patches can be freely moved, and the two patches are perforated, one is fixed on the wardrobe door, and the other is fixed on the side of the wardrobe, so that the wardrobe can be opened and closed freely for easy opening.
Vintage wardrobe hinge type introduction
Wardrobe hinges are divided into ordinary hinges, spring hinges, hydraulic hinges, door hinges, etc., mainly used in cabinet doors, windows, wardrobe doors, partition doors, gates and other places. Wardrobe hinges can be divided into materials: iron, copper, and stainless steel. From the specifications can be divided into: 2 # (50mm), 2.5 # (65mm), 3 # (75mm), 4 # (100mm), 5 # (125mm), 6 # (150mm), 50 ~ 65mm specifications of the hinge Suitable for cabinets, wardrobe doors, 75mm for windows, screen doors, 100~150mm for common wooden doors in the door, aluminum doors. The disadvantage of the ordinary hinge is that it does not have the function of spring hinge, it is easy to rust, it is not convenient to open, and it is necessary to install various anti-collision devices after installation, otherwise it is easy to be affected by external force and the door panel is loose. In addition to these, there are some special detachable hinges, h hinges and other wooden doors that can be disassembled according to various special requirements. It is very convenient and can be limited according to the direction when used.
Vintage wardrobe hinge installation points
1. Before installation, check whether the hinge matches the door and window frame and the fan.
2. Check if the hinge slot and hinge height, width and thickness match.
3. Check whether the hinges and the screws and fasteners connected to them are matched.
4. The connection of the hinge should match the material of the frame and the fan. For example, the hinge used for the steel frame wooden door, the side connected to the steel frame is welded, and the side connected with the wooden door fan is fixed by wood screws.
5. In the case where the two sheets of the hinge are asymmetrical, it should be discriminated which board should be connected to the fan, which one should be connected to the door and window frame, and the side connected to the three sections of the shaft should be fixed with the frame. The side connected to the two sections of the shaft shall be fixed to the door and window.
6. When installing, ensure that the hinges on the same fan are on the same vertical line to prevent the door and window fans from bounce.
The above is the introduction of the old wardrobe hinges. The old wardrobe hinges can make our wardrobe switch smooth but need to be built on the basis of installation. Therefore, it is convenient for us to use the old wardrobe hinges. Pages, while the old wardrobe hinge installation points do not necessarily correspond to all the hinges, which also requires us to understand the old wardrobe hinges to be able to carry out well.
Automatic Pet Feeder,Automatic Feeder,Timed Cat Feeder,Auto Cat Feeder
Green Source(Guangzhou) Co. Ltd. , https://www.stargalaxycn.com