Steps for cleaning the range hood

With the continuous development of technology, the range hood is constantly improving and developing. Nowadays, there are many brands and types of range hoods in the market. How do you choose the range hood? What kinds of range hoods are there? What are the steps for cleaning the hood? Let's take a look at it together.

Introduction to the steps of cleaning the range hood

Steps for cleaning the range hood 1: First step: Use precautions. Before use, sprinkle a thin layer of soap powder on the two oil storage tanks and inject about one-third of the water. The oil floats on the surface of the water, and then it is processed as usual. Or you can put a small one-time oil tank in the oil storage box. After collecting the waste oil, take it out and throw it away. In addition to the first time we cleaned the hood, the waste oil filtered out the top layer of grease and used it as a detergent to wipe the body.

Steps for cleaning the range hood 2: Cleaning the fuselage, the main organic shell of the range hood, the air duct, the fan, the check valve, the oil collecting device, the lighting device, the power switch and the power cord. It is important to know which ones can be cleaned and which ones can't be cleaned. First cut off the power of the smoking hood to ensure the most basic life safety. Use a screwdriver to remove the screws on the casing and remove the casing and the oil net. If the oil on the oil net is very thick, use a tool to gently wipe off the excess grease and then mix it with a neutral detergent. In warm water, soak for three minutes and wipe with a clean rag.

Steps for cleaning the range hood 3: Cleaning the fan blades. In addition to the oily smoke, the fan blades can be cleaned with a detergent + vinegar mixture. This solution is non-polluting to the human body. Another is the high pressure steam method. The specific method is to put half a pot of cold water in the pressure cooker, heat, and take the lower limit pressure valve when the steam is continuously discharged, open the range hood to align the steam water column with the rotating fan blade, and the oil sewage will flow into the waste oil along the oil drain tank. In the box. The turbine of the hood is treated in the same way.

Range hood type description

Range hood type description 1: Chinese style range hood: mainly divided into old-fashioned shallow deep suction range hood, especially the shallow suction type is the main elimination object, which is the ordinary exhaust fan, which directly discharges the soot to the outside, deep suction The biggest problem of the hood is that it takes up space, is noisy, easy to meet, dripping oil, and the fumes are not clean, the service life is short, the cleaning is inconvenient, and the environment is polluted.

Range hood type description 2: European style range hood: It uses 5 - layer layer of multi-layer oil net to increase the motor power to achieve the best effect. The general power is more than 300 watts. The advantage is that the appearance is beautiful, the price is expensive, and the fee is high. Electricity, the disadvantage is that the oil net cleaning is not convenient, easy to meet, dripping oil, smoke smoke effect is poor.

Range hood type description 3: Side suction type range hood: Side suction type (also called near suction type) range hood is a product developed in recent years, which changes the design of traditional hood and the way of fume extraction. The generated soot is sucked away, basically achieving the effect of removing the soot, and the patented product of the side suction type range hood, the soot separation board, completely solves the problem that the Chinese cooking fiery cooking oil smoke is difficult to remove.

I believe that after reading the steps of the above cleaning hood and the description of the type of hood, should you help to understand the cleaning hood? I hope that I can help you with the hood maintenance.