PIGGOTT PRINTERS Since its installation of the ECRM AIR75 direct-to-plate system, the work cycle has been cut in half. This AIR75 is for 4 printers.
The company's general manager, MICHAEL CARTWRIGHT, pointed out that the concept of "one-stop STOP" has become increasingly popular among customers. He said: "Although accurate market positioning may bring huge profits, I think service diversity and The combination of universalization is a more testable business philosophy. This is why we pay more attention to service speed and service quality, not just the market. As we all know, shortening the work cycle and improving work efficiency has become a major trend. Customers need us to supply faster, simplify processes, and increase efficiency. After using AIR75, we can do a lot of work efficiently and high quality in a day.†MICHAEL CARTWRIGHT said: “CTP is a new technology, It is difficult to determine which machine to buy. A few years ago, we purchased the ECRM KNOCKOUT 4550 laser imagesetter and established a good relationship with ECRM. After watching the demonstration of AIR75, we decided to purchase AIR75.â€
MARK HOWLETT said: "Initially, I did not believe in CTP, but it turned out that the quality of the output of the printing plate was quite high and the printing effect was much better than the traditional process of outputting film."
After PIGGOTT PRINTERS adopts CTP, there are five workstations and WINDOWS NT servers in the prepress section. Using DK&A INPOSITION software, the page is automatically imposed and the document is sent to AIR75 via the server. Automatic imposition saves time and effort. AIR75 exposes more than 100 plates per hour. Photopolymer or silver salt plates can be used. The resolution can be varied from 1016dpi to 2540dpi and the repeatability can reach 0.001 inches. AIR75 can be applied to 22.9cm*30.5cm to 61.6cm*82cm digitized metal plates.
AIR75 has automatic processing and line flushing system, can be operated in the bright room, the operator only need to place the plate box.
Mr. MICHAEL CARTWIGHT said that they are now using HP DesignJET and Seiko proofing machines for proofing. It may take some time for full digital work. At the beginning, about 20% of the businesses use AIR75 output. In the near future, 70%-80% of the businesses will use direct platemaking.
The company's general manager, MICHAEL CARTWRIGHT, pointed out that the concept of "one-stop STOP" has become increasingly popular among customers. He said: "Although accurate market positioning may bring huge profits, I think service diversity and The combination of universalization is a more testable business philosophy. This is why we pay more attention to service speed and service quality, not just the market. As we all know, shortening the work cycle and improving work efficiency has become a major trend. Customers need us to supply faster, simplify processes, and increase efficiency. After using AIR75, we can do a lot of work efficiently and high quality in a day.†MICHAEL CARTWRIGHT said: “CTP is a new technology, It is difficult to determine which machine to buy. A few years ago, we purchased the ECRM KNOCKOUT 4550 laser imagesetter and established a good relationship with ECRM. After watching the demonstration of AIR75, we decided to purchase AIR75.â€
MARK HOWLETT said: "Initially, I did not believe in CTP, but it turned out that the quality of the output of the printing plate was quite high and the printing effect was much better than the traditional process of outputting film."
After PIGGOTT PRINTERS adopts CTP, there are five workstations and WINDOWS NT servers in the prepress section. Using DK&A INPOSITION software, the page is automatically imposed and the document is sent to AIR75 via the server. Automatic imposition saves time and effort. AIR75 exposes more than 100 plates per hour. Photopolymer or silver salt plates can be used. The resolution can be varied from 1016dpi to 2540dpi and the repeatability can reach 0.001 inches. AIR75 can be applied to 22.9cm*30.5cm to 61.6cm*82cm digitized metal plates.
AIR75 has automatic processing and line flushing system, can be operated in the bright room, the operator only need to place the plate box.
Mr. MICHAEL CARTWIGHT said that they are now using HP DesignJET and Seiko proofing machines for proofing. It may take some time for full digital work. At the beginning, about 20% of the businesses use AIR75 output. In the near future, 70%-80% of the businesses will use direct platemaking.
Commercial Furniture,Commercial Office Furniture,Commercial Desk,Commercial Lounge Furniture
NINGBO CHEN WEI SUPPLY CHAIN MANAGEMENT CO.,LTD , https://www.nbchenweifurniture.com