Where to buy solid wood furniture?
According to the material classification, at present, the furniture sold in the market is mainly divided into solid wood furniture and sheet furniture. This classification seems simple, but the furniture placed in the store is finished products, which are solid wood and which are plates. It is difficult to distinguish between ordinary consumers by appearance. Only by mastering certain purchasing skills can we avoid buying shoddy and flashy furniture.
Solid wood furniture refers to furniture made of natural wood, and the texture of the wood is generally seen on the surface of the furniture. At present, there are two kinds of solid wood furniture on the market. One is pure solid wood furniture. All the materials of this kind of furniture are solid wood. The other is imitation solid wood furniture, which is the natural texture, feel and color of wood. They are the same as solid wood furniture, but they are actually furniture made of solid wood and wood-based panels.
Advantages: The material is natural and chemically free, in line with the psychological needs of modern people who admire nature.
Disadvantages: easy to deform, the finished product can not be disassembled, it is not convenient to carry.
Buying points to see wood grain and knots
Due to different materials, in the home store, the same table, the price of solid wood furniture and sheet furniture is more than a thousand dollars. It is understood that the special material of solid wood forms a natural color difference, wood knot and texture. As long as you carefully read it according to the introduction of the merchant, you can identify the solid wood and the board.
Material selection: Nowadays, the wood species used in the Suzhou market are made of elm, teak, maple, eucalyptus, oak, ash, birch, elm, poplar, elm, pine, etc. Among them, eucalyptus, eucalyptus, and ash are the most expensive, and the corresponding prices are also high. Look at the pattern and knot: solid wood furniture has a natural wood texture, a good solid wood board, you see a pattern from the front, open the door, the corresponding position can also see the corresponding pattern. Similarly, pure solid wood boards generally have a frontal location of the scar and a scar on the other side.
Buying skills "three look, two touches and one pressure"
For the sake of environmental protection, most solid wood furniture is made by a combination of solid wood and wood-based panels. This process not only avoids cracking and warping due to the large-area use of solid wood, but also maintains pure nature. The beautiful texture of the logs, without losing the noble and elegant nature of solid wood furniture. It is understood that due to the different processing technology, the purchase of such solid wood must be "three look and two touches and one pressure."
Third look: First look at the material. Generally good solid wood furniture, after opening the door and drawer, the wood is dry and white, the texture is clear, the texture is tight and delicate. At the same time, good solid wood furniture can not have any pungent odor. Look at the components. When buying solid wood furniture, you should carefully check the parts of the furniture, such as the sofa legs, columns, and the load-bearing horizontal bars that are close to the ground between the columns to ensure that there are no large knots or cracks or cracks; check the sliding and positioning of the drawer. Open all the doors and drawers to see if the screws at the joints of the components are tight; whether the internal wood-based panels are edge-sealed, and the various accessories are installed with many pieces, no nails, and no nails. Finally, look at the place of origin. If the moisture content of solid wood furniture is higher than 1% of the average moisture content of the area of ​​use, cracking, deformation, loosening, warping, etc. may occur. Therefore, it is best to buy furniture produced by a brand that has a good dry process.
Second touch: It is to touch the surface is smooth, good solid wood furniture surface is flat, there will be no problems such as protrusions; then touch the furniture corners and other parts, such as rough, indicating that the process is relatively poor.
One pressure: When selecting solid wood furniture, it is necessary to lightly press the various points of the furniture, such as the column foot or the shelf support, to test whether it is stable.
Furniture should also adapt to the difference between the north and the south to buy solid wood furniture to pay attention to moisture content
The main role of furniture in modern homes is wooden furniture, in which solid wood furniture occupies the main battlefield of high-end consumption, but most people often only look at styles and plates when purchasing wooden furniture, while others are concerned about the quality of furniture. The details are half-resolved or indifferent. In fact, when purchasing wooden furniture, especially solid wood furniture, the moisture content of wood, the processing of paint film, the connection of concrete structure, etc. are all places to pay more attention to. Jiangsu quality supervision experts remind consumers. Especially when you choose off-site wood, it should be said that the moisture content of wood has a great relationship with the intrinsic quality of furniture.
Water content is not intuitive but important
Some consumers have told reporters that their own solid wood flooring has not been used for a year, and cracking has occurred. However, they usually pay attention to protection. How can this happen? In fact, not only solid wood flooring, some solid wood furniture, doors and windows, etc. will also have such a phenomenon, and the most direct cause of this phenomenon is the moisture content of wood.
Usually, the wood itself contains a certain amount of water, so it will be dried before the furniture is made. This is well known, but the drying must follow certain standards, even if the moisture content and use of the furniture materials The average moisture content of the regional atmosphere remains the same. When purchasing wooden furniture, especially solid wood furniture, if there is no professional detector, it is difficult for consumers to know whether the wooden furniture meets the prescribed standards. However, we cannot ignore the importance of water content because it cannot be visually reflected.
Due to the difference in geographical location, the average moisture content in the atmosphere will vary. Therefore, the water content requirements of wooden furniture vary from region to region. For example, the average moisture content of air in Nanjing is 14%, compared with 11.4% in the northern region. Left and right, specific to the requirements of the furniture is the local average moisture content between plus and minus 1, the relevant experts told reporters. The water content directly affects the quality and use of wooden furniture, especially solid wood furniture. When the water content is low, the wood will absorb the moisture in the air, causing the furniture to expand and deform. When the water content is high, the furniture will be in danger of cracking. In general, wooden furniture, especially solid wood furniture, preferably has a moisture content that is a little lower than the average moisture content of the local air, for example, one to two percentage points. In the market in Nanjing, there are many products of wood from the north, or directly from the northern production, and it is conceivable that the air in the north is dryer than the south, where the moisture content of the wood is lower than that of the south, so the north The wooden furniture, especially the solid wood furniture and the wood, must be strictly treated, and there are two problems in this. One is the requirement of construction technology, and the other is the cost requirement. If the coordination of the two aspects is not guaranteed, the water is still guaranteed. If the rate is effectively treated, the southern wooden furniture is indeed more prone to problems in the northern environment.
Choose wooden furniture to start from the details
Although the moisture content of the wood is measured by the detector, the consumer can still test it by some simple methods. The quality supervision expert said that the consumer can touch the surface of the wooden furniture by hand if there is moisture. And the sense of coldness, indicating that the moisture content of the furniture may be high. However, since consumers see samples that have been placed in the store for a certain period of time, the moisture content is almost balanced, so if the moisture content of the furniture is not assured, the new furniture should be measured by a professional detector.
In addition to the water content, experts also told reporters that you should pay attention to other details when purchasing wooden furniture.
First of all, the structure of the furniture, such as the table, can be shaken by hand, to see if it is stable and unstable; the sofa should sit and sway, if it is not active, not soft, no sound, it means the structure of the blink is relatively firm. Secondly, when buying wood furniture, don't just look at the smooth surface paint, but also touch the thick coating. If the paint film is too thin, the heat resistance and scratch resistance of the furniture will decrease. In addition, pay attention to the paint film at the corners, the corners are not straight and right angles, and the straight edges are easy to fall off. A paint should also be painted inside the door of the furniture. The non-painted sheet is easy to bend and not beautiful.
In addition, it is not easy to see if the furniture veneer is flat when it is flat. Moreover, the edge is not flat, indicating that the inner material may be wet, and the sealing may fall off in a few days. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips are prone to moisture and cracking.
Solid wood furniture also has formaldehyde
Children's furniture can not be seen directly
In foreign countries, children are the embodiment of angels. In the country, children have always been the flowers and hopes of the motherland. Home is the most important place for children to grow up. Children's furniture is a "partner" that grows with them. Industry experts believe that the selection of children's furniture, safety should be in the first place, otherwise, regret it.
Solid wood furniture is also completely free of formaldehyde
Environmental protection is the primary issue of safety. In the most environmentally friendly Nordic, solid wood furniture has always been the material of choice for children's furniture. However, there are not many children's furniture made of solid wood, many of which are made by a combination of solid wood and wood-based panels. The main frame is made of solid wood, side panels, partitions, etc. using thin wood veneer particle board or medium density fiberboard. This process avoids cracking and warping due to the large-area use of solid wood, while maintaining the beautiful texture of pure natural logs.
Many consumers think that solid wood is a misunderstanding than environmental protection. The key is to look at the craftsmanship of manufacturers. If the natural wood is applied to the concrete structure, it is absolutely environmentally friendly, but most of them are glued together with glue, and the surface is painted, which involves formaldehyde.
Physical security is also important
Environmental protection is only the chemical composition of children's furniture safety, and whether it is safe depends on its physical safety, such as whether the strength of furniture materials meets the standards, whether the corners of furniture are properly handled, and whether other designs have potential danger to children. Because the baby is naturally active, the furniture must be safe and secure, and if necessary, it can be fixed to prevent the baby from falling over the furniture and being hurt. Some children's furniture only pay attention to the shape in the design, but neglecting the safety and convenience, such as the design of the ladder and the rounding problem at the end of the plate, have not been fundamentally solved and paid attention.
In addition, children's furniture should be carefully considered in terms of scale and ease of operation. For example, there are stairs on the upper and lower floors, and the height of the steps, the scale of the slope and the width of the ladder are all very particular. At the same time, children's furniture must also take into account the requirements of stability, environmental protection and easy cleaning.
Preroll Tube with childproof cap
Preroll Tube With Childproof Cap,child resistant pre roll tubes,pre roll packaging tube,pre roll tubes with label packaging
NANTONG OUFEIYA IMP& EXP CO.,LTD , https://www.zjnantongoufeiya.com