With the development of printing technology, the emergence of new inkjet printers provides different solutions for users at all levels. For home users, SOHO users, and SMB desktop users, low- and medium-priced inkjet printers are still the most appropriate choice. In addition, high-end inkjet printers have shown increasingly amazing performance as technology has improved. So, how much do you know about HP inkjet printers? What are the tips for using it?
HP inkjet printers can be divided into two types: piezoelectric inkjet technology and thermal inkjet technology. According to the material properties of inkjet, it can be divided into water-based materials, solid inks and liquid inks.
HP inkjet printer tips
First, the use of color spray box (here refers to the same type of ink cartridges) in the process, pay attention to the balanced use of red, yellow, blue and other colors, do not only print pictures that are more than one color, because as long as the ink cartridges are exhausted The color of the inkjet cartridge cannot be used even if the other colors are not used up. In general, the higher the resolution of the printed image, the more ink is used. Light colors consume less ink, and bright red or blue composite colors require more than one basic color synthesis, thus requiring more ink to be consumed.
Second, do not switch the printer frequently, because many types of printers will perform self-test procedures when they are turned on, they will consume ink, and try to print the materials that need to be printed together (but at the same time, be careful not to let the printer work continuously for a long time). This will also save ink.
Third, if the integrated ink cartridge print head is clogged, the following methods can be used to improve:
1. Immerse the print head section (excluding the circuit board) in warm water for about 10-20 minutes to allow the warm water to dissolve the dry dye (note: keep the board dry).
2. Place the print head on a few soft and dry paper towels, and let the paper towel slowly dry the residual moisture and ink of the nozzle. Please do not wipe the print head hard. If the cartridge needs to be used immediately, return it to the correct position in the printer. If it is not used, you can purchase a special print head protection seat (clip) for proper storage. The rubber pad inside the protection seat (clip) can block the air and keep the nozzle moist for a long time.
3. When the ink cartridge is out of ink, do not print any more. Printing will burn the nozzle (because it only uses the electric potential nozzle to eject ink and borrow ink to dissipate heat).
The above is the introduction of the use of HP inkjet printers. Mastering these skills will make it easier and more convenient for you to use, save time and do more things. I hope this article will help you.
We can make Metal Holder,Steel Holder,Stainless Steel Holder,Cord Holder,Holder Bracket,Hanger Holder,Headphone Holder,Hose Holder,Napkin Holder,Dispenser Holder,File Holder,Sponge Holder,Stand Holder,Cup Holder,Dryer Holder,Lamp Holder,Picture Hangers,Mounting Holder,Motor Holder,Toothbrush Holder, Lamp Holder, for you.
Mounting Holder,Motor Holder,Cup Holder,Dryer Holder,Lamp Holder,Picture Hangers,Stand Holder,Dispenser Holder,File Holder,Sponge Holder,Metal Holder,Steel Holder,Stainless Steel Holder,Cord Holder,Holder Bracket,Hanger Holder,Headphone Holder,Hose Holder
MGX Metalworks Co., Ltd. , https://www.mgxmetal.com