[ Chinese Wardrobe ] Customized wardrobes are not the same as finished wardrobes. They can be tailored to your room type. Installation and general furniture are also different. Here is a more standard installation process.
First, the preparation stage
1. Material is present
More formal furniture manufacturers, cardboard packaging is generally shipped to the site. After unpacking, check the plates and hardware.
2. Fixing screws
The nails are generally left on the plates according to the design drawings, and the workers at the site use special tools to fix the screws.
3. Measuring side panels
Since the closet is placed against the wall, the side panel is sawn off at the position of the baseboard. After you have it, look it up and see if it fits.
Custom wardrobe installation
Second, the installation phase
1. Place the ground on the floor of the floor closet to be cleaned beforehand, because it will be very troublesome to clean up after installation.
2. Fixed frame
Install the side and back panels of the closet according to the grooves on the board and adjust the position between the boards.
3. Install the top plate
It is best to prepare a climbing stool on the scene. The top plate should be lifted up and then fixed with rivets.
4. Mounting shelf
Place the shelf where you have previously screwed it and then secure it. Pay attention to the fixed position of the shelf and the back and side panels.
5. Fixed door rail
The door rails are installed on the top and bottom sides of the wardrobe. The material of the door rails is better, lighter and firmer.
6. Install the clothes rail
Fix the rivets in the reserved position and install the clothes rail. Note that the two sides should be balanced.
Finally, since the custom furniture is produced by combining the product with the site, there may be situations in which the product and the site may not be fully matched to the site.
Hair Cutting Scissors,Barber Cutting Scissors,Professional Hair Cut Scissors,Stainless Steel Barber Scissors
Zhangjiagang Mister Tools Co., Ltd , https://www.mingshitools.com