1. Connect the power supply and close the air switch on the left side of the main control cabinet. At this time, the power lamp of the main operation panel operation section is on.
2. After the main motor switch is turned on, the main motor runs without load and the motor lamp lights up.
3, press the car ready button, buzzer ring.
4, after the buzzer sounds, press the button to understand the machine, inch hole operation. The village understand button is mainly used for tuning. Press the operation button and the machine operates at the set speed.
5. Conveyor manual button, conveyor automatic button, conveyor stop button.
A, press the conveyor manual button, the conveyor starts running continuously.
B, press the conveyor automatic button, when the object through the electric eye, the conveyor automatically runs, when the electric eye can not see the object, the conveyor delay automatically stop.
C. Press the stop button of the conveyor to stop the conveyor no matter the conveyor is running automatically or in manual mode.
6. When the machine is running normally, press the feed button to start feeding, press the stop button, and stop feeding. When the paper is fed normally, the vibration motor can be turned on to improve the quality of paper feeding.
7, six operating boxes: for mobile, designed for easy operation. The above operation buttons function the same as the main control panel.
8. The machine is equipped with a horizontal running motor switch and governor at the horizontal running section, which can be adjusted as needed. An emergency stop button box is also installed near the box of the machine for emergency use.
Trolley Handle For Soft Luggage
Trolley Handle For Soft Luggage,Luggage Handle Attachment Parts,Suitcase Luggage Pull Handle,Leisure Luggage Handle
GUANGDONG SUNDES LUGGAGE ACCESSORY TECHNOLOGIES CO.,LTD , https://www.sundes-global.com