Safe use of printer supplies need to pay attention to where

First, the inkjet printer supplies ink and solvent are corrosive, so try to avoid not contaminating the skin, eyes, nose and so on. Safe use requires the following measures:

1. Most inks contain ingredients that are easily volatilized and inhaled into the lungs. Good ventilation must be guaranteed.

2. If you inadvertently drip in, rinse with plenty of water for a quarter of a minute. If you feel uncomfortable after cleaning, clean up and seek medical advice.

3. Printer insurance If it burns out, be sure to replace the same size fuse. It is best to contact the supplier for repair.

4. Enterprises with large-scale electrical equipment, such as cable plants, should be prepared to provide uninterrupted power supply to prevent unstable printer operation and power supply damage.

5. The printer is different from other devices, its principle is to rely on electrostatic deflection, so be sure to ground well.

6. If the grounding is not good, the accumulation of static electricity to a certain extent may cause sparks and fire.

7. Bad grounding may cause problems such as poor ink dot separation and poor print quality. Therefore, the printer must be grounded.

Second, inkjet printer supplies mostly use ketone-based or alcohol-based ink, mostly acetone, alcohol and the like cleaning fluid. Use the following points when using:

1. Any used cleaning material is a fire hazard. For example, wipes, wipes, etc., must be promptly recovered after use and treated in a safe manner.

2. The chemical reagents for the printer consumables are flammable and explosive. Therefore, during the use process, care must be taken to prevent fires.

3. Many inks contain nitrocellulose as a binder. Therefore, nitrocellulose is used as a binder. Therefore, the flammability during drying is very high, and oxygen is generated when it is burned. Therefore, it is preferable to use a cooling method for fire suppression. For example, water is a better choice.

4. Do not use water to extinguish the fire caused by electrical appliances. If you must use water to extinguish fires such as nitrocellulose ink, you must first disconnect the power supply.