The composition system of the Shanghai Bilang experimental spray dryer.
The laboratory spray dryer is specially designed for small and high-efficiency spray dryers designed for colleges and universities, research institutes, pharmaceutical factories, scientific research departments engaged in medicine (Chinese medicine, western medicine, bio-pharmaceuticals), food and chemical research, and drying process. Medium and low noise, fast drying speed, low liquid heating temperature, simple and convenient operation process, especially suitable for drying of heat sensitive materials. It still retains its original color and aroma, and has good dispersibility, fluidity and solubility. The solvent can directly obtain uniform dry powder, which is labor-saving, labor-saving and hygienic.
Spray drying technology is directly used for powdering and drying, and is now being used by a large number of laboratories. In particular, the domestic laboratory spray dryer has been successfully developed, which has greatly reduced the price of the most expensive equipment. The high-end experimental equipment has become the routine equipment of many laboratories, which greatly satisfied the domestic laboratories. demand.
The following is a comparison of the composition of the laboratory spray dryer:
1. Hot air circulation system.
In the process of spray drying, the hot air circulation system is the main power and carrier for drying, collecting and steam discharging. The L-117 and L-217 models produced by the company adopt a vacuum suction method to circulate hot air in the system. The advantage is that the hot air is controlled in the system, no leakage, does not affect the experimental environment, and allows the experimenter to work in a clean experimental environment.
In the import of other brands and other domestic brands, the positive pressure blown hot air circulation system is widely used. Because of the positive pressure generated inside the system, the pressure of the hot air leakage is implied at each joint of the spray drying system. Therefore, because the hot air containing dust leaks out of the laboratory, it is not suitable for the work requirements of laboratory personnel. It has been confirmed by experiments that the vacuum suction type hot air circulation system is matched with the reasonable cyclone collection system. The collection rate of the spray dryer sample results is more than 10% higher than that of the positive pressure blown spray dryer, especially in the experiment of the micro sample. more obvious.
2, cyclone collection system
The cyclone collector is a very classic powder collector and is widely used in spray dryer systems. Its structural shape directly affects the collection rate of the powder and plays an important role in the spray dryer. For the spray dryer system, the performance of the cyclone collector often depends on the actual operation observation and experimental results, so the most reliable way to purchase the spray dryer is to test it yourself.
3, liquid material atomization system
In spray dryer systems, the atomizing nozzle is a vital component and is available in four nozzle sizes of 0.7mm, 1.0mm, 1.4mm and 2.0mm. According to different materials and solutions, the nozzle selection should be selected after consultation with the product experts or after the experiment. Shanghai Billion Instrument Co., Ltd. provides the service for the user to test spray or give the user a trial, in order to let the user buy the most suitable product. The experimental process of spray drying is to achieve a complete set of processes for the successful drying of a certain material. Each experimental parameter is part of the whole process, including the selection of nozzles, so the manufacturer is very important to the user's technical guidance, and friendly technical support will greatly help the user's experimental success.
BILON brand, service attentively
Round Dining Table,Dining Table 6 Seater,Dining Table 4 Seater,Corner Dining Table
CAMOSA HOME , https://www.camosa-funiture.com