[ Chinese wardrobe network ] Modern people pursue the convenience of life, but also pay attention to the quality of life. Simple wardrobe , intimate service and convenient storage, is an indispensable helper for your home. The simple wardrobe is convenient and practical, but the installation of the simple wardrobe is difficult for many people. How to install the simple wardrobe? The following is the installation method of the simple wardrobe.
Equipment installation
Some of the steel pipes in the closet have the number, you can put them together with the number.
The second step, the process. 1. Find the parts of the chassis and put them together. Note that it is only the bottom part. Some have a shoe rack, you must first install the shoe rack part.
1. The bottom of the plate is placed and installed.
2. Classification of plates. For example: top plate, side plate, neutral plate, etc.
3. The position of the classification plate is placed. For example, the top plate is on the upper side and the left side is right, and the bottom plate is in the lower line.
Second installation
1. When installing, the cabinet is facing down, press left to right or right to left to install.
2. After the assembly of the board is completed, please ensure that the diagonal error of the cabinet is within plus or minus 1MM.
3. After the diagonal measurement is completed, please mark the position of the laminate or the vertical plate on the side plates (side plates) to facilitate the nail back plate nails.
4. After the cabinet is placed in place, please use the level to measure whether the cabinet is horizontal. If it is not horizontal, please adjust it to the horizontal position. The common method is to put things under the cabinet.
5. After the cabinet is level, you can install it in order: clothes rail, drawer, door panel or sliding door. After telescopic mirror, install the handle according to customer requirements.
2, note that the second step is not to put the rest of the shelves, and the first on the cloth. Open the zipper of the cloth, and the place where the middle sticks is also pulled open, bottom down. There are some small holes dug in the bottom of the cloth. Pull the cloth from top to bottom according to each hole and pull down the vertical tubes. You can not pull to the bottom first.
3. Put the rest of the pipe in the cloth, then pull the cloth up, cover the top of the pipe, and adjust it until the cloth looks flat and there are no wrinkles.
4. Our installation is complete.
Some are plastic interfaces, sometimes they are a bit tight. Don't use strong force to insert, accidentally crack, no place to buy accessories. Do not screw one on the screw interface, it will bring difficulties to the future installation. First loosely put the shelves up, and after loading them, use the screwdriver to tighten all the screws. This way you will get a sturdy simple wardrobe!
you are walking down the aisle in the pet store, and you spot the wide array of puppy toys. Who can resist?! But, how do you know which ones are the safest for your furry baby? You want to avoid any toys that are too small or have sharp parts, long strings of fiber, plastic, ones that are squeaky rubber toys or that have foam stuffing as they can cause choking or intestinal obstructions. Consider selecting artificial bones or toys made with hard nylon that pups can use for teething, balls or chew toys made of hard rubber, or rawhide bones made from materials that are safe if swallowed. Always remember to supervise your precious pup when they are playing with their toys. It`s the safest thing to do!
Pet Toys,Puppy Toys,Dog And Cant Chew Toy,Interactive Cat Toys
SY INTERNATIONAL (CN) CO.,LTD , https://www.symanufactures.com