LANGE 1 DAYMATIC

Putting LANGE 1 together with LANGE 1 DAYMATIC often creates a "mirror image" illusion. Seemingly symmetrical two dials, there are subtle differences in essence, but also hidden two completely different watchmaking concepts.

LANGE 1 DAYMATIC and LANGE 1 18K rose gold style

LANGE 1 with manual winding movement, while the LANGE 1 DAYMATIC is equipped with self-winding movement. Two designs each have fans, manual focus on the "consciousness", while the self-winding is like "subconscious" in general. LANGE 1 attracts "orthodox" practitioners who value the traditional way of getting on the chain, while LANGE 1 DAYMATIC tends to be the "pragmatist" choice for convenience. Whenever you pull up your sleeves and gently glimpse the watch, they will first see the time display on the right side of the dial. This is especially handy for most left-handed people.

Another difference between the two concepts on the chain. Manual winding LANGE 1 with three days power reserve indicator, very useful. Located on the right between the Lange's large calendar display and the small seconds dial, the design is modeled after the Lange classic UP / DOWN instructions. This information is not necessary if you wear the self-winding watch frequently, as the power reserve is usually maintained at medium to high levels based on the frequency of wearer activities. To this end, LANGE 1 DAYMATIC turn to the retrograde week display and large calendar display each other. After midnight, the pointer will advance one grid. When the transition from Sunday to Monday, the pointer will jump back to the bottom again and resume the process of daily advance until it reaches the top scale.

Near the mirror of the two dial design

Both models of eccentric dial have a perfect ratio, the structure of harmony, elegant and charming. The center of the large calendar display, the power reserve indicator, and the day of the week show the mandrel, as well as the small second hand mandrels on the same line. This straight line is also the bottom line of the isosceles triangle structure, the top of which is connected to the center of the main dial.

LANGE 1 first appeared in 1994. In 2015, the new hand-wound movement was introduced on the basis of retaining its unique design. LANGE 1 DAYMATIC in 2010 to become a new member of the LANGE 1 watch series.

Differences and the same characteristics
	LANGE 1	LANGE 1 DAYMATIC
Movement	Manual winding Lange watch factory made L121.1-type movement, double barrel	Lange watch factory self-made L121.1-type movement, automatic dial in the home
Movement parts	368	426
Gemstone bearings	43	67
Screw the gold sleeve	8	7
Oscillation system	Anti-seismic balance balance with eccentric weight, Lange balance spring, frequency up to 21,600 times per hour	Seismic Glucydur balance wheel with eccentric weights, Lange balance springs, frequency up to 21,600 times per hour
Power reserve	72 hours	50 hours
Other functions	Stop-seconds device with a small second disk, Lange calendar display, UP / DOWN power reserve instructions	Stop-seconds device with a small second disk, Lange large calendar display, reverse the week show
Case diameter	38.5 mm	39.5 mm
Movement diameter	30.6 mm	31.6 mm
Style	18K gold, 18K rose gold, white 18K gold, 950 platinum	18K gold, 18K rose gold, 950 platinum

Highlights And Contouring

Highlights And Contouring can modify the facial features, partially brighten, increase the gloss of makeup, and enhance the contours of the face

Highlights Benefits:
â‘ Putting white highlighter on the bridge of the nose can make the bridge of the nose look very high, and can form natural shadows on both sides of the nose, which can appear thin and straight under the illusion of sight.
â‘¡ Sweep some highlighter powder on the upper part of the brow bone and cheekbones to make the eye area and eyelids appear deep and enhance the contours of the cheeks.
â‘¢ Sweep a layer of highlighter on the chin to balance the center of gravity of the entire face and reflect the overall three-dimensional feeling
Contouring:

It is used to modify the contours of the face and make the facial features more three-dimensional and stylish. Especially the Orientals, due to the lack of congenital conditions, more need to use the contour powder. Generally brown or coffee is the main color, and it is used to modify the contours of the face. Sweep the sunken areas of the face such as the sides of the bridge of the nose, both sides of the forehead, and under the cheekbones with a paint brush, which can create shadows and instantly reduce the shape of the wide face. And usually, the center of the forehead, the bridge of the nose and the chin are all places where light-colored powder is applied. Apply light colors to the temples and under the eyes to make the eyes brighter and brighter. It should be noted that the transition between the light-colored powder and the surrounding skin tone should be natural, especially where the shades intersect.
Two-tone repair powder
Two-tone repair powder
Contouring is to use chromatic aberration to achieve a more refined facial contour.
The dark contour can be hit on the junction of the forehead and the hairline, as well as the corners of the mandible and chewing muscles, making the face smaller.
Bright colors, such as pearl white, are used to brighten up. They can be hit on the temples, and the triangle area under the eyes, that is, the bags under the eyes. It can also be used on the bridge of the nose to make the nose firmer.

Highlights And Contouring,Best Contour Powder,Contour And Highlight Stick,Makeup Contour Stick

Guangzhou Natural Beauty Cosmetics Co;Ltd , https://www.artmissnatural.com