People say that buying furniture is a matter of learning. If you buy solid wood furniture, you need to examine it carefully when you choose it. Because there are many types of solid wood in the furniture market, and the furniture chaos is very serious. Xiaobian teaches you a few points, easy to buy high quality solid wood furniture.
1. How to distinguish whether it is solid wood material?
The important point in judging whether solid wood furniture is wood grain and knots. If the appearance of the furniture looks like a pattern, then along the position where the pattern changes, whether there is a corresponding pattern on the back side, if it corresponds well, it means pure solid wood furniture. In addition, looking at the wood knot is also a good way to identify the solid wood: also look at the location of the scar side, and then find the corresponding pattern on the other side.
2. What are the common solid wood materials?
The material directly affects the price and quality of the furniture. Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood, eucalyptus, while the relatively expensive mahogany furniture mainly uses rosewood, wenge, rosewood. The market for solid wood furniture is worrying, and there are often times of shoddy and confusing materials. Therefore, consumers are better to buy brand-name products. At the same time, it should be noted that the price of wood is rising day by day. Too cheap is generally not reliable.
3. How to distinguish the quality of solid wood?
Open the furniture cabinet door and drawer to observe whether the wood is dry and white, and the texture is tight, even and delicate. Xiaobian suggested that if it is made of materials such as particle board, MDF and one-time forming board, it is necessary to open the door or drawer to smell whether it has a pungent smell.
4, observe the wood with or without defects
The bearing capacity of the furniture is very important, so the foot column, column and other parts can not make mistakes, the structure is required to be firm, the frame must not be loose, and it is not allowed to break or break the material. The components of the wood-based panels used in the furniture shall be subjected to strict edge-sealing treatment, and various accessories shall be installed with few pieces, missing nails and nails.
5, observe the strength of the board surface
The strength of the board surface can be directly pressed with a finger to feel the fastness of the board surface. One material is fixed by a well-shaped skeleton. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate obviously. The drawer bottom plate is hand pressed to test the strength. Generally, the bottom of the partition is multi-layered, and the partition is large. It should be made of five-layer board. The doors and drawers of the cabinets should be flexible. When the panel is covered with thin wood and other materials, the color of the product should be similar, and the paint film on the surface of the product should not be wrinkled, sticky or leaky.
6, check stability and safety
Observe whether there is a drawer or the door frame is tilted, whether there is a tweezers or a large eye hole, and the presence or absence of a taro is not strict. According to Xiaobian, wooden furniture should have certain safety and stability. When the two doors are opened 90 degrees, they should be gently pulled in the direction of their own. The cabinet should not be able to tilt forward automatically; The glass of the door should be edging; the back mirror should be installed on the dressing mirror and the Dressing Table, and the glass should be firmly fixed. Individual parts of the furniture (such as legs, drawers, doors or brackets) must be strong enough. You can gently push the top corner of the furniture or sit on one side and try the furniture stability.
7, check the interface rails and other details
Furniture with dovetail or butterfly joints should be purchased. Heavier furniture should be screwed with a protective block in the corner and glued. As for the back panel, it is also necessary to check whether it is inlaid and screw it up. The drawer section should be solid and secure with the screws tightened inside. Try the drawers, the event table, the door and other parts to make sure you can use it freely and connect it properly.
8, check whether the surface is smooth
Gently rub the surface of the furniture and carefully check whether the polished surface is smooth. In particular, avoid the roughness of the table legs, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles.
9. Turn the furniture upside down to observe
Turn the chair upside down on the furniture and look at how they are made. Xiaobian prompts that the table also needs to be checked from the bottom. See if the seams are reinforced with screws and wedges, if the slats are fastened to the crosspieces, and if there are any excess glue and filler in the joints...
Chest Of Drawer,Mirrored Chest Of Drawers,Bedroom Chest Of Drawers,Bedside Chest Of Drawers
DUOBUY TECHNOLOGY SHANDONG CO., LTD. , https://www.doubuytech.com