After a long time, the furniture is inevitably a little damaged and affects the appearance. Now Xiaobian teaches you how to repair furniture, simple, no trouble, just need a little home daily gadgets, and save money!
1, repair the paint surface
If the furniture lacquer is damaged by burning, you can put a fine cloth on the toothpick, gently wipe the traces, and then apply a thin layer of wax, the scorch marks can be removed; if the furniture lacquer is scratched, the available A crayon or pigment with the same color of furniture, painted on the wound surface of the furniture, covered with an exposed base color, and then coated with a thin layer of transparent nail polish; if the wax oil drops on the furniture surface, do not use a sharp edge Or nail scraping, should wait until the daytime Light is good, use plastic sheets, hands clasp, tilt forward, slowly scrape the wax oil from the front of the body, and then wipe with a fine cloth.
2, the furniture surface starts from the drum
After the decorative veneer is bubbling, you can use a sharp blade to cut a knife in the middle of the bubble in the direction of the wood grain, then use a syringe to inject the glue into the seam, gently press it on the top of the bubble with your finger, and use the wet cloth with the spilled glue. Clean, and then use a weight that is smoother on the bottom surface and larger than the bubble area. In order to prevent a small amount of glue from overflowing and sticking to the peripheral surface of the bubbling after the pressurization, the plastic film may be covered on the bubble so that the decorative veneer is flat.
3, eliminate water marks
Water droplets on the furniture, if not dried immediately, will leave traces of water stains. In this case, the wet cloth can be used to cover the traces, and then the wet cloth is carefully pressed several times with an electric iron, and the moisture of the traces will evaporate with heat, and the water marks can be eliminated.
4, repair dents
Some furniture is soft because of the wood, leaving a dent after the collision. At this time, you can use a wet towel to place it in the depression, and then iron it with an iron to restore it. If the dent is deep, add a filler.
5, remove the old paint
If you want to remove the paint from the furniture, you can remove the old paint by applying the failed developer to the painted surface of the furniture. After washing and drying, it can be polished again with fine sandpaper.
6, repair cracks
If the solid wood furniture is cracked due to heat and cold shrinkage, the following remedial measures can be taken; the old cotton cloth or the broken sack is burned to ash, and then mixed with the raw tung oil to form a paste, which is embedded in the crack of the wood, and can be filled after being dried in the shade. cement. Or, tear the newspaper into pieces. Add some alum and water, boil it into a thick paste, apply it to the cracks of the wood after cooling, and it is very firm after drying.
Wine Rack,Metal Wine Rack,Bamboo Wine Rack,Wine Racks For Wine Cellar
ningbo haonuo hardware factory , https://www.haonuocrafts.com