Friends who like to raise flowers pay more attention to the appearance of flower pots. Flower pot making is a technical activity. Good gardeners not only raise flowers, but also make flower pots very delicate. For the production of flower pots, choose the right materials to create a good garden environment. So everyone knows how to make flower pots? Today, Xiaobian will take a look at the precautions for making pots and making pots!
Method of making flower pots
1. Draw the size of the inner and outer molds on the pearl plate with a ballpoint pen.
2. Cut and cut along the line with a utility knife.
3. The pearl plate after cutting is fixed with a styrofoam glue in a back shape.
4. Strengthen the fixing on the sides and bottom with a pin.
5. After completing the inner and outer molds, seal the gap and the periphery with a transparent tape.
6. Cut a small piece of pearl plate to the center of the bottom of the outer mold as a space for the bottom hole.
7. Mix the cement mortar with a spoon (cement: water = 2:1). If the water is too little or the mixing is uneven, the cement basin will be brittle.
8. Fill the cement mortar to about half the height in the outer mold.
9. Place the inner mold in the center of the outer mold and press it to the bottom.
10. Scotch tape cross method to fix the inner and outer molds.
11, static and ventilated in a cool place for two days, do not get exposed to the sun, so as not to cause the cement slurry to shrink quickly and crack.
12. Use a utility knife and needle-nosed pliers to carefully remove the inner mold.
13. Cut the outer mold with a utility knife and remove the cement pot.
14. Poke the center of the bottom with a needle-nosed pliers and poke the pearl plate to expose the bottom hole.
15. Sharpen the sharp or rough surface of the bowl with sandpaper.
16. Soak the pot in the water for maintenance. After seven days, take it out and dry it. The curing can cause the cement pot to produce a hydration reaction in the water, in order to release the alkaline substance and strengthen the pot structure.
Making flower pots
1. The cement flower pot mould that meets the standard, where is the standard? The texture of the cement pot is obvious, and the texture of the cement pot is clear. Secondly, the texture angle is large, so that the cement pot will not be damaged when the mold is removed. Another point is that the density of the cement pot mold itself should be reached, so that its use strength is more durable, in case the flower pot is deformed.
2. It is a material problem. Many novice friends like to use fine sand when they are doing cement pots. If they don’t know how to add stones, the cement pots they make will not be strong. After a year of wind and sun, cracks may occur. In this case, the cement pots are not good, and no one even wants them.
3. The last point is that when the cement flower pot mold is taken off, it is necessary to store water and maintain it. If it is such a simple problem, there will be mistakes from friends. Water storage should fill the water, and the cement pots are fine. The flower pot cracked along the top, which is the meaning, must be in place.
How about, I read the wonderful introduction to the pot making above. Have you learned a lot about the production of flower pots? I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.
More related wonderful reading:
What can be used to make pots to make pots difficult?
What are the methods for making flower pots? Type of flower pot
How to make a flower pot plastic bucket to make a flower pot
Five Function Hand Shower Head
Five Function Hand Shower Head,Handheld Shower Head With Diverter Valve,Matte Black Shower Fixtures With Handheld,Ceiling Rain Shower Head With Handheld
Ningbo Teamer Imp. & Exp. Co., Ltd. , https://www.dokour.com