Maintenance work of constant temperature and humidity test chamber condenser

The increase in the service life of the constant temperature and humidity test chamber is not only related to the overall maintenance of the equipment, but also has a great relationship with the maintenance of individual components. There is not a good saying that the good details determine success or failure, the maintenance of the internal parts of the equipment is in place, and the maintenance of the overall equipment will be more effective. Therefore, the following small series will specifically talk about the maintenance of the condenser in the equipment:

The condensation of the steam condenser is usually applied to the condensation in the secondary steam of the multi-effect evaporator to ensure the vacuum of the final effect evaporator, and its maintenance is naturally more careful than other parts. It needs regular maintenance. If the dust sticks to the condenser, it will cause the high-voltage switch of the compressor to fall off and generate an alarm. You can use a hard brush after the test chamber is opened. If the test object is to be taken from the furnace, the article should not be in contact with the rubber edge on the door to avoid damage to the rubber edge and shorten the life. In addition, it is necessary to keep the floor around the bottom of the fuselage clean at all times, which can avoid a large amount of dust from being sucked into the unit and causing accidents and performance degradation. The humidifier should be cleaned frequently to prevent the generation of scale and affect the emission of steam. After the test, it should be cleaned once in time, and the scale can be removed in time, which is beneficial to the life of the humidification tube to ensure smooth water flow.

In addition to the above-mentioned maintenance, the condenser in the constant temperature and humidity test chamber is also important for other detailed maintenance matters. For example, the water level of the water storage cylinder should not be too high, so as to avoid abnormal water absorption of the wet bulb test cloth. phenomenon.

Maintenance work of constant temperature and humidity test chamber condenser

Pet Toys

Pet Toys,Pet Chew Toy,Custom Pet Dog Toy,Pet Dog Chew Toy

Yangzhou Pet's Products CO.,LTD , https://www.paiqipets.com