Many people think that extreme weather conditions such as excessive temperature, too dry or too much rain and too humid in summer are not a good season for home decoration. In fact, things have two sides. On the other hand, it is precisely because of special climatic conditions that summer decoration has special advantages. If you avoid the negative side and make full use of the positive side, it is the wisdom of life.
The traditional wisdom that is widely spoken is not necessarily scientific and reasonable. For example, when it comes to summer decoration, many people think that it is not a good season. According to a survey, 37% of people believe that the difference in the decoration season is an important cause of the quality of the decoration. In fact, whether it is spring, summer, autumn or winter, due to the different characteristics of each season, it will cause certain troubles for the decoration project, such as the wetness of spring and the cold of winter, and at the same time, it will bring certain Favorable conditions. The key point is, from which point of view do you look at the problem, whether the attitude toward things is positive or negative? Try to avoid unfavorable factors, and make full use of the favorable factors, that is, the wisdom of life.
What are the advantages of summer decoration? First of all, whether the material is environmentally friendly is easier to distinguish. We all know that the various woods, wood-based panels, glues and even the finished furniture purchased in the decoration process may hide the formaldehyde, and the harmful gases such as bismuth and benzene contained in the paint will remain in the paint for a long time. In the newly renovated living room, it poses a health hazard. Summer is the season to accelerate the release of harmful substances such as formaldehyde in the air. From another point of view, it is beneficial to check whether the decoration materials are environmentally friendly. Taking wood materials as an example, when the temperature reaches above 28 ° C and the humidity exceeds 45%, the formaldehyde is released in multiples. At this time, the nose can be used to roughly judge whether the materials used by the main material or the decoration workers are environmentally friendly, and the materials with strong pungent smell are easily rejected. In addition, while the construction is carried out at this time, the release of poison gas is accelerated, so it is generally safer and more environmentally friendly to decorate and open the new home in the summer.
Secondly, the summer paint is better. Although the rainy season in the south will indeed bring some trouble to the decoration, in fact, unless there is rain for seven or eight consecutive days, it will have a certain impact on the decoration, that is, the paint is not easy to dry out. But even if this happens, the problem is only an extension of the construction period. If it is very urgent, and want to catch up with the construction period, it is ok to let the workers blow the wall with an electric fan, and it will not affect the quality of the decoration. The positive benefits are: the summer temperature is high, the smell is easy to volatilize, the paint dries quickly, the sanding is timely, the gloss of the paint can be fully revealed, and the paint effect is best.
In addition, in the summer, you may get unexpected benefits in terms of renovation prices and project quality. Due to the traditional off-season of the home improvement industry, decoration companies often do some promotional activities, not only affordable, but also skilled workers are more likely to pick during this time. There are still many companies that hope to use the off-season to seriously and let the workers do a few good projects, and prepare them for the "decoration model house" that comes at the peak of the season. In addition, during the summer day, the working hours of the decoration workers are relatively extended, which is also very helpful for speeding up the progress of the project and shortening the construction period.
Due to the special climatic conditions in summer, there are some details that require special attention. The first is the bricklayer. In summer, the temperature is higher and the water evaporates too quickly. If the material is not suitable, it is easy to crack and even fall off, so the requirements for bricklayers are relatively high. In order to ensure that the tiles are fully absorbent, it is best to soak them in advance, and then take out the water before picking up the water. After the surface is dried, it is necessary to soak the water twice, and use it while fishing, so that the tiles that absorb the moisture can be obeyed. Stick to the ground and the wall. After tiling the tiled floor, it is best to cover it with a layer of cardboard, pour it through the water, then open the window and let it dry naturally. For the wall with the ceramic tile attached, if you encounter high temperature and do not rain for a long time, you should spray water regularly to make the tile dry slowly and stick more firmly.
Followed by woodwork. Another characteristic of summer is that there are many heavy rains, and when the air humidity is high, it is easy to cause some wood products to be deformed. However, from the current decoration process, many wood products such as doors, floors, furniture, etc., are not processed on site, but are dehydrated in the constant temperature room of the factory and subjected to high temperature compression treatment. So it is not affected by the season. For the wood-made products produced on the spot, there are some special requirements in the summer. Regular home improvement companies generally have a complete construction process system, and construction in strict accordance with these standards can avoid quality problems.
Finally, summer decoration has higher requirements for the safety of hydropower materials. The materials used for the pipe, tape and other materials must be resistant to long-lasting high temperatures. At present, the galvanized iron pipe is mostly used for the wire pipe. If the quality is higher, the hot-dip galvanized iron pipe can be used to strengthen the strength and hardness of the material. The connector of the circuit is guaranteed by electrical safety. Long time high temperature can easily cause the insulating tape to fall off, which poses a safety hazard. If you want a better process, you can use a connector instead of a black tape to avoid the tape falling off at the joint. Tips easy to ignore summer decoration details
Stacking materials on the construction site, from a safety point of view, try to keep it in a cool place to avoid fire caused by burning due to low air circulation and high temperature.
For houses facing south or west, it is necessary to adopt shading measures to maintain proper indoor temperature and avoid excessive temperature difference between indoor and outdoor. According to the standard, the room temperature of summer decoration is controlled at around 28 °C.
Wallpapers and paints should be naturally dry. Because the summer is dry, the wallpaper should be soaked in water before the paving, and then the glue is applied. If you want to open the doors and windows at this time, let the wallpaper just put on the wind, and the wallpaper will lose water quickly. Shrinkage deformation occurred.
In the summer decoration, it is easy to encounter the latex paint because it is slow to dry and will be mildewed and smelly in hot and humid weather. The common method is to open the air conditioner to dehumidify and remove the moisture in the air; the furniture cabinet door is not closed and kept ventilated. .
The summer temperature is high, the toxic substances are easy to volatilize, and the newly renovated houses should pay attention to the indoor environment. Whenever possible, try to make the room more ventilated. If there are no conditions, you can use indoor ventilation and air purification devices that can reduce indoor harmful gases.
The Face access control attendance machine is mainly used for the attendance statistics of the company's employees. Have Android attendance Face Recognition and Linux attendance face recognition When employees sign in, they need to collect the employee's facial photos through the camera, and then use the attendance face recognition algorithm to obtain the feature values from the collected photos and store them in the database in face access control attendance system. Analyze and compare the feature values of the employee's face photos. If the employee's name is reported after the recognition is successful, the attendance is successful.
Android Attendance Face Recognition,Linux Attendance Face Recognition,Face Access Control Attendance System,Face Access Control Attendance Machine
Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.szzcsecurity.com